BOSE Lifestyle Model 5
I would appreciate any assistance on how to program my XR11 remote, to controll a BOSE Lifestyle 5 sound system. The BOSE uses an RF remote.I have tried all of the code Comcast listed and also the 993...
View ArticleRe: BOSE Lifestyle Model 5
The XR11 remote can control only X1 boxes via RF communiction. All other devices including your Bose system are controlled via Infrared (line of sight). Your Bose system needs to be within line of...
View ArticleSwitch between shows on 6 (hard drives?) to view channel
We just had the X1 Cloud(?) (arris AR AX013ANM) installed and a selling feature was that this unit could record 6 shows at once.Question 1): Is that recording 5 shows and watching a non-recorded...
View ArticleRe: Switch between shows on 6 (hard drives?) to view channel
debenllc wrote:We just had the X1 Cloud(?) (arris AR AX013ANM) installed and a selling feature was that this unit could record 6 shows at once.Question 1): Is that recording 5 shows and watching a...
View ArticleRe: voice guidance stops speaking and hangs up the system
I suggest you contact Comcast directly for help with this issue...Smiley1970 wrote:For the past few weeks I've been having a problem where the voice guidance feature frequently stops working and I lose...
View ArticleRe: Switch between shows on 6 (hard drives?) to view channel
Question 1): OK, that's good to know. We don't have any client boxes. We're trying to decide whether to stay with Tivo or switch to X1.Question 2): Sorry, I mis spoke, I should have referenced "tuners"...
View ArticleRe: BOSE Lifestyle Model 5
Will the X1 Cloud remote be programmed to control the Bose 25 RF (no line of sight needed)? Thank you.
View ArticleRe: BOSE Lifestyle Model 5
No.As stated earlier, the X1 remotes will only communicate with X1 boxes via RF. Any and all other communication from X1 remotes is via Infrared signals.X1 remotes require line of sight with any device...
View ArticleRe: XI5, how does it work.
Did you read this? http://www.multichannel.com/news/cable-tv-conventions/intx-2016-comcast-sets-july-4-debut-first-hdr-capable-box/405030
View ArticleRe: X1 getting long in the tooth?
http://www.multichannel.com/news/cable-tv-conventions/intx-2016-comcast-sets-july-4-debut-first-hdr-capable-box/405030
View ArticleRe: Collecting data on " Font too small or large on the X1 Guide Channel"
I'm sure my issue is because I have a smaller 20" TV in the bedroom , but the guide is really too small to read on the X1 system. I just switched , the old cable box guide was easy to read since the...
View ArticleRe: X1 getting long in the tooth?
I would add that company is moving toward wifi connected TVs (no coax) and no physical DVR (drives) in the home (moving to cloud based).
View ArticleRe: Switch between shows on 6 (hard drives?) to view channel
debenllc wrote:Question 1): OK, that's good to know. We don't have any client boxes. We're trying to decide whether to stay with Tivo or switch to X1.Question 2): Sorry, I mis spoke, I should have...
View ArticleRe: Upcoming X1 Updates
Maybe its name should be something else. Not sure what you want it to do when you click it. Move to the end of the recording and wait there? Then what happens? Does it sit there waiting for user...
View ArticleRe: Upcoming X1 Updates
BeowolfJones wrote:I'm with you TeriB about skip to the end. As it is it should be more correctly labeled "skip to beginning". It would be better if the DVR could skip forward 10 minutes" at a time....
View ArticleRe: Upcoming X1 Updates
TerriB wrote:ComcastAndrew wrote:Am I off base?_________________Maybe. What you really need is a skip not quite to the end? When you go to the end of a recording it goes back to the recording list,...
View ArticleRe: Upcoming X1 Updates
HowAboutThisOne wrote:Exit does not get you to the end of a recording. It just exits the recording at the point it was last playing. That recording, then ends up in the "Recently Watched" list on the...
View ArticleRe: Upcoming X1 Updates
HowAboutThisOne wrote:Maybe its name should be something else. Not sure what you want it to do when you click it. Move to the end of the recording and wait there? Then what happens? Does it sit there...
View Article